apple tv remote not working but light blinks

Apple TV remotes come in several different versions depending on which generation of Apple TV you own.

Newer Apple TV models have a Siri-based remote control and offer voice control and navigation mechanisms.

These remotes are pretty sturdy, but sometimes we all experience issues that are frustrating.

In this article, we look at some of the reasons why your Apple TV Remote not working and what you can do to fix the problems at hand. 

Easy Ways to Fixed Apple TV remote isn’t working [Light Blinks]

Fix 1: Charge it!

  • Just to state the obvious, make sure you fully charge your battery!
  • Charge your Siri Remote or Apple TV Remote for at least 30 minutes with the Lightning to USB cable connected to a wall charger (not a computer)

Fix 2: Remove an obstacle or obstacles and keep it within range

  • Make sure to remove anything that blocks the path between your Apple Remote and the front of your Apple TV, which is where the IR sensor is.
  • We’d love it if the Apple TV remote came equipped with an RF signal instead of IR, but since it’s IR, line-of-sight needs to be clear for the remote to communicate with the TV unit.
  • For Siri remotes, you also need to stay within this range because the remote relies on a Bluetooth connection to your Apple TV.
How to Fix Apple TV Remote Not Working

Fix 3: Reset the Apple TV remote and connection

  • Unplug your Apple TV from power. Wait six seconds or more, then plug it back in
  • Try your remote again
  • If you are using the Siri remote, you can reset it by simultaneously pressing the Menu and Volume Up buttons. This action resets your remote and puts it back into pairing mode.

Fix 4: Re-pair your remote with your Apple TV

  • For the Siri remote, point it about three inches away from your Apple TV
  • Then press and hold the Menu and Volume Up buttons on the remote for five seconds
  • If prompted, place your remote over Apple TV to complete the pairing
  • For the aluminum or white remote, connect it to your Apple TV. On your Apple Remote, press and hold the Menu and Right buttons for six seconds
  • On the TV screen, look for a link symbol just above the remote control icon
  • When you press the Apple TV remote, check the response of the light on the Apple TV unit. If it flashes three times in a row, it means you have already paired the remote to the TV with a different remote.

Fix 5: If the light blinks when you press the buttons on your Apple Remote, but nothing happens on your TV

  • Try to pair your Apple TV with your TV remote and then go to remote settings and search to pair it with your Apple TV remote
  • If you are using the Siri remote, you can reset it by simultaneously pressing the Menu and Volume Up buttons. This action resets your remote and puts it back into pairing mode
  • Try holding down the Menu and Down buttons on the Apple Remote to restart your Apple TV
  • If you still need help after the reset, unplug your Apple TV from the power outlet. Wait at least six seconds, then plug it back in. Sometimes unplugging the unit can work
  • If your Apple TV light isn’t blinking and you see an exclamation point in a triangle on your TV screen, replace the battery in your Apple Remote

If your Apple TV 4 Siri Remote won’t connect, the best solution is to go to Best Buy and buy one of the USB-C cables and do a factory reset on your Apple TV 4 through iTunes.

How to Fix Apple TV Remote Not Working

Siri Remote Only Issues

  • Some users have also complained about calibrating speed on the new Siri Remote.
  • If the touchpad is too sensitive for you, you can’t adjust the sensitivity, but you can change how fast you scroll. The default is Medium, but if you go to Settings > Remotes and Devices > Touch Pad Tracking , you can change it to Fast or Slow How to Fix Apple TV Remote Not Working
  • Changing your surface tracking speed can be helpful if you’re having difficulty entering characters on the on-screen keyboard
  • Another handy tip for selecting characters on the on-screen keyboard: To swipe right to the end of the alphabet, you can swipe a little harder on your Apple TV remote’s touchpad, and the “cursor” will fly across the screen at any time. address.
  • If the remote still doesn’t respond, you may want to make an appointment at the Genius Bar and have them take a look at it.
    • In the meantime, you can use your iPhone and iPad and use these devices as a remote to control your Apple TV.

The key is to make sure you have Home Sharing set up and that you are using the same wi-fi network

  • Connect your iPhone/iPad with the Remote app to your Wi-Fi network at home
  • Make sure your Apple TV is connected to the same WiFi network. Using the same network is critical for your remote app to work with your Apple TV
  • On the Apple TV, go to Settings > General > Remotes and Devices > Remote App 
  • When prompted, enter the Apple ID and password you use for home-sharing
  • Now, open the Remote app on your iOS device
  • Go to the Settings screen and select the Apple TV
  • It takes a few minutes to pair the app with the Apple TV, and you should be able to use your iOS device to control your Apple TV.

Use the Apple Tv Remote app on your iPhone, iPad, or iPod How to Fix Apple TV Remote Not Working

For people using iOS 12 and above who own a fourth-generation Apple TV and above, the Apple TV Remote app is automatically added to Control Center for easy access.

The Apple TV Remote app works just like your remote! Quickly navigate and control playback on your Apple TV 4K or Apple TV (4th generation).

How to set up Apple TV Remote app for iOS 11 and below

  1. Make sure you have the latest software for your Apple TV and iDevice
  2. Download the Apple TV Remote app from the App Store, if needed
  3. Connect your Apple TV and iDevice to the same Wi-Fi network
  4. Open the Apple TV Remote app on your iDevice
  5. Tap Add Apple TV
  6. Select your Apple T
    1. On Apple TV 4K or Apple TV (4th generation), wait for a four-digit code to appear on your TV How to Fix Apple TV Remote Not Working
    2. Enter this code on the pairing screen
    3. If the code does not appear and you can control your Apple TV, your iOS device is already paired, go ahead and use the app
  7. On your iDevice, go to Settings > Control Center > Customize Controls and tap the plus sign (+) next to Apple TV Remote
  8. Open Control Center on your device and tap the Apple TV Remote icon How to Fix Apple TV Remote Not Working
  9. Tap your Apple TV from the list
  10. Enter the four-digit passcode that appears on your Apple TV screen if prompted

We wish you all the best. Please feel free to share your comments.

Leave a Reply

Your email address will not be published. Required fields are marked *