Tesla software updates are designed to improve the performance and safety of your vehicle. However, sometimes the update process can freeze or become stuck, preventing the update from completing. In the article how to fix Tesla Software not updating and stuck at 30,50,60 and 100.

Tesla Software Update Stuck is an issue that can occur when a Tesla vehicle is attempting to download a software update. This issue is caused when the download process is interrupted or the vehicle cannot complete the download. When this happens, the car will be stuck in a loop of attempting to download the update and will not be able to move forward. This can be a frustrating issue for Tesla owners as it prevents them from using their vehicles until the issue is resolved. Fortunately, a few steps can be taken to resolve this issue.

Why Is My Tesla Software Update Frozen?

There are a few possible reasons why your Tesla software update may be frozen. The most common cause is a poor internet connection. If your internet connection is slow or unreliable, it can cause the update to freeze or fail. Additionally, if the update is interrupted due to a power outage or other issues, it can cause the update to freeze. Finally, if the update is corrupted or incomplete, it can also cause the update to freeze.

If your Tesla software update is frozen, there are a few steps you can take to try and resolve the issue. These include restarting the update, checking your internet connection, and contacting Tesla customer service for assistance.

How to Fix Tesla Software Update Stuck

Below we provide you the best solution for Fixed the Tesla Software Update Stuck at 3, 5, 50, 60, and 100.

1. Check your Internet Connection

First, you need to have good Wi-Fi and a High-Speed internet connection. in your area good Wi-Fi or Data network connection, Tesla software will update, wait and chill. Additionally, even when you have a 60 percent update installation and the connection gets tempered, it will still freeze.

2. Vehicle Restart

To restart a Tesla car, press and hold the power button for five seconds. The car will then restart.

3. Total shutdown and reboot

Sit in the car with the door closed and don’t touch anything or open the door other than to follow instructions. It’s also best to do it in a quiet place as being able to hear the car can help, otherwise pay attention to the time.

Release the brake pedal if it is depressed.

Go to the main screen, open the service menu and select “Shut down”. After a while the displays/display will have turned off, the interior light will have turned off and the system will be shutting down.

If you can hear the car, you may still hear some background noise from the car. If this is the case, wait until the car is quiet.

4. Restart Update or Download

If you restart your car software system, you can restart your download.

The download cannot be restarted by rebooting when a glitch occurs.

Different Tesla models use different methods for rebooting. There are some models that use scroll wheels to reboot. 

tesla software update stuck installing

Some work by pressing a button on the steering wheel or by turning the vehicle completely off.

5. Restart the Console Processor

To restart the Console Processor on a Tesla car, you will need to power down the car completely. This can be done by pressing and holding the power button on the center console for at least 10 seconds. Once the car is powered down, wait for at least 10 seconds before powering it back up. This will reset the Console Processor and should resolve the tesla software update stuck downloading issues you may be experiencing.

6. Tesla’s Customer Support

Tesla’s Customer Support can be contacted by phone, email, or through their website. The phone number for Tesla’s Customer Support is 877-798-3752. The email address for Tesla’s Customer Support is support@tesla.com. The website for Tesla’s Customer Support is https://www.tesla.com/support.

What to do when the Tesla software update is stuck?

If a Tesla software update is stuck, the first thing to do is to check the Tesla app or the Tesla website to see if there is an issue with the update.

If there is, contact Tesla customer service for assistance.

If there is no issue with the update, try restarting the car by pressing and holding the power button for 10 seconds. If the update is still stuck, contact Tesla customer service for further assistance.

How long does Tesla software update take?

Tesla software updates typically take anywhere from 30 minutes to 2 hours to complete, depending on the size of the update.

Can Tesla download update while charging?

Yes, Tesla vehicles can download updates while charging. Tesla vehicles are designed to receive over-the-air software updates while charging. Tesla owners can also manually initiate an update while their vehicle is plugged in.

How do I reset my Tesla software update?

To reset your Tesla software update, you can either use the Tesla mobile app or the in-car touchscreen. To reset the update using the mobile app, go to the ‘Software’ tab and select ‘Reset Software Update’. To reset the update using the in-car touchscreen, go to the ‘Settings menu and select ‘Software Update’. Then, select ‘Reset Software Update’.

Leave a Reply

Your email address will not be published. Required fields are marked *