LG TV Remote Not Working

If you’re like most people, you probably use your TV remote on a daily basis. But what happens when your remote stops working? If you’re having trouble with your LG TV remote, there are a few things you can try to get it working again.

If your LG TV remote isn’t working, there are a few things you can try to fix the issue. First, check the batteries to make sure they’re properly installed. If the batteries are low, replace them with new ones. If the batteries aren’t the issue, try resetting the LG TV remote by pressing the reset button. If the remote still isn’t working, contact LG customer service for further assistance.

Why is my LG TV not responding to the Remote?

There are a few reasons why your LG TV might not be responding to the remote. The most common reason is that the batteries in the remote are dead.

If this is the case, replace the batteries and try again. If the remote still does not work, there may be an issue with the remote itself. You can try resetting the remote by pressing the “reset” button.

If the remote still does not work, it may need to be replaced. Another possibility is that there is an issue with the TV itself. If the TV is not responding to the remote, try pressing the “menu” button on the TV. If the menu appears, then the TV is working and the issue is with the remote.

If the menu does not appear, there may be an issue with the TV. Try unplugging the TV and plugging it.

Must Read: How to Fix Apple TV Remote Not Working

LG TV Remote Not Working After Update: Fixed

If your LG TV remote is not working after you’ve updated the firmware, there are a few things you can try to fix the issue. First, try resetting the remote by removing the batteries and then putting them back in. If that doesn’t work, try unplugging the TV from power for 30 seconds and then plugging it back in. You can also try reprogramming the remote by following the instructions in the user manual.

If none of these solutions work, then you may need to contact LG customer support for further assistance.

Read: 5 Ways To Fix Hisense TV Remote Not Working [Red Light]

How to Fix LG TV Remote/Home Button Not Working?

If your LG TV remote is not working, there are a few things you can try to fix the LG TV Home button not working.

Solution 1: Check the batteries

lg tv remote not working after battery change

Check to make sure all the batteries inside the LG TV remote control are good when the remote isn’t working.

You need to remove the back cover to perform this step. You will notice weak batteries with the remote when you test it. The voltage of the batteries can also be checked using a multimeter.

Solution 2: Clean the Batteries Contacts

lg tv remote not working with sound bar

Besides cleaning the contacts where the battery is connected to the remote, you should also check the battery itself.

The remote must be cleaned after being stored in a bag or anywhere else where it has been exposed to dust and dirt. Gently scrub the remote contacts with a toothbrush or Q-tip. Moreover, use an old piece of cloth to remove any excess dust or dirt. Do not use a fresh piece since it might become dirty while in use.

Solution 3: Test the remote

After cleaning the contacts, you should test the remote to make sure it works by pressing the OK button.

Now that the red LEDs are steady, they should not flash anymore. It’s possible that the batteries are the problem if the lights are still blinking.

After you have cleaned your remote contacts, if it works properly, then there is another possibility.

Solution 4: Replace the Batteries

lg tv remote not working with new batteries

In the case that the remote still doesn’t work after testing it with a different TV, you should replace the batteries.

You might want to replace them with new ones. Check, however, that the batteries are equally strong before you do that. The weaker batteries should be replaced if they are not. Also, take care that no moisture gets into the battery cells. It includes all battery types inside the remote including the batteries that power it.

Solution 5: Reset the Remote:

Another thing you can try if your LG TV remote still doesn’t work is to reset it.

Furthermore, you’ll have to re-program it since this will erase all your programming. Here’s how:

  • Keep holding the Menu button for 10 seconds until the screen disappears.
  • Releasing the button will lead to the factory default settings on the remote.
  • Check if the problem still exists when you use the remote.
  • If it does, set it up again following the above instructions.

If you are having trouble with your LG TV remote, there are a few things you can try. First, make sure that the batteries are fresh and that the remote is within range of the TV. If the remote still does not work, try resetting it. If that does not work, you may need to contact LG customer service for further assistance.

Leave a Reply

Your email address will not be published.