Kenmore Washer won't Spin or Drain

Do you need help with your Kenmore washer that won’t Spin or Drain?

In this article, you will learn about a few common problems that Kenmore washers have, as well as what to do about them.

Kenmore Washer Won’t Spin

You can usually fix them yourself when they are having trouble. Check our information below and save money on a repairman rather than spending it on your Kenmore washing machine.

Solution 1: Lid Switch (Top Load Machine)

In the case that the lid switch is faulty, the Kenmore washer will not spin.

A safety feature, this keeps people from sticking their hands while the washer is spinning, thus preventing accidents.

In order to test this, you will use a multimeter to check for continuity in the switch. If none is found, replace it.

Solution 2: Drive Belt

Make sure the drive belt is tight enough when inspecting the motor, as it connects the motor to the transmission.

In order to tighten or replace the belt, you need to make sure it is securely attached to the pulley.

Solution 3: Motor Coupling

Your washer’s motor is connected to the transmission by the motor coupling.

If the washer is overloaded, the coupling will fail automatically to protect the transmission and motor.

You will need to replace it if you find that it is broken from normal use.

Solution 4: Motor Control Board

It provides power to the motor. When this control board fails, the washer won’t function at all and will fail to perform properly.

First, you will need to check the board for broken components. After that, you will need to check that the board is supplying power. If the board is not supplying power to the motor, we recommend replacing the board.

Solution 5: Transmission Clutch

This clutch works to assist the tub by gradually gaining the proper speed. It is the part that connects the tub to the transmission.

The clutch is not repairable and must be replaced once it becomes worn out. This part is not reusable and must be purchased separately.

Solution 6: Rotor And Stator Assembly

Both the stator and the rotor combine to create a strong electromagnetic field that makes the tub spin in both directions.

You can damage the magnets inside the washer rotor, and this may prevent it from spinning. You’ll need to replace this part if it is damaged before repairing it.

You can check the stator windings for any defect that may indicate a need to replace the stator.

Kenmore Washer Won’t Drain? Check

Drain Pump Or Hose

To check if you have a blocked drain pump or hose, you need to take the drain apart and see if debris is inside.

Make sure the pump and the hose are free of clogs if obstructions are found.

Make sure the drain hose isn’t damaged in any way while it’s off. If you find any damage replace it.

Clogged Pump or Hose

Socks or other clothing articles can clog the drain system, so remove the hose from the pump and look for obstructions.

Coin Trap Or Filter

Coin traps are a feature on some Kenmore washers that can catch small objects before they get thrown into the pump. This part needs to be kept free from debris to ensure the washer is draining correctly.

Removing the trap and thoroughly cleaning it is all that is needed.

Door Lock Motor and Switch Assembly

The door lock prevents the washer from beginning to operate. Once the washer door has been closed, it can start working again.

Should the washer door be left open, it will prevent the washer from running. Should the door lock malfunction, the washer will not start or spin.

It is possible that the door lock will fail mechanically or electrically. You need to inspect the door lock for damage, and if necessary replace it.

 The door lock’s electrical connection should be tested using a multimeter. If any of the door lock switches do not have continuity, replace the switch. Refer to your washer’s wiring diagram to check. 

Water Pump Belt

The water pump belt on some older washers may be broken or worn out. If so, the washer will not drain. Inspect the belt to determine whether excessive wear is present.

Kenmore Washer won’t Spin or Drain – Are these tips helped you?

Were you satisfied with the article How to Fix Kenmore Washer That Won’t Drain? If not Successful then It is best to contact a Kenmore Authorized Repair Center if you experience any issues.

Leave a Reply

Your email address will not be published. Required fields are marked *