If your Hisense TV remote is not working properly, don’t panic. It can be fixed in a matter of minutes with this guide.
If the remote control on your Hisense TV is not working, first check if the batteries are loaded correctly and if they are fine. If you have replaced the old batteries with a new one, but your remote still isn’t working, try to reset it. check out our guide on Hisense TV Black Screen Issue
Why Hisense TV Remote not Working?
A common problem is the Hisense TV remote not working. This can be due to a variety of reasons. The most common reason for this problem is that the batteries need replacing. If the batteries are weak, they will not transmit signals properly and this will cause problems with your remote control.
- Weak batteries
- TV Sensor not Working Properly
- Remote Parts Damaged
- Corrupted settings
Also Read: How to Fix Vizio Tv Watchfree Not Working
How to Fix Hisense TV Remote Not Working [Sensor]
If your Hisense TV remote isn’t working, you may have a faulty battery, or the batteries are in the wrong place. Either way, this article will guide you through how to fix the problem.
Solution 1: Check the batteries
Check to make sure all the batteries inside the Hisense TV remote control are good when the remote isn’t working.
You simply need to remove the back cover to perform this step. You will notice weak batteries with the remote when you test it. The voltage of the batteries can also be checked using a multimeter.
Solution 2: Clean the Batteries Contacts
Besides cleaning the contacts where the battery is connected to the remote, you should also check the battery itself.
The remote must be cleaned after being stored in a bag or anywhere else where it has been exposed to dust and dirt. Gently scrub the remote contacts with a toothbrush or Q-tip. Moreover, use an old piece of cloth to remove any excess dust or dirt. Do not use a fresh piece since it might become dirty while in use.
Solution 3: Test the remote
After cleaning the contacts, you should test the remote to make sure it works by pressing the OK button.
Now that the red LEDs are steady, they should not flash anymore. It’s possible that the batteries are the problem if the lights are still blinking.
After you have cleaned your remote contacts, if it works properly, then there is another possibility.
Solution 4: Replace the Batteries
In the case that the remote still doesn’t work after testing it with a different TV, you should replace the batteries.
You might want to replace them with new ones. Check, however, that the batteries are equally strong before you do that. The weaker batteries should be replaced if they are not. Also, take care that no moisture gets into the battery cells. It includes all battery types inside the remote including the batteries that power it.
Solution 5: Reset the Remote:
Another thing you can try if your Hisense TV remote still doesn’t work is to reset it.
Furthermore, you’ll have to re-program it since this will erase all your programming. Here’s how:
- Keep holding the Menu button for 10 seconds until the screen disappears.
- Releasing the button will lead to the factory default settings on the remote.
- Check if the problem still exists when you use the remote.
- If it does, set it up again following the above instructions.
People Also Ask:
How do I reset my Hisense TV remote?
1. Remove the remote’s battery and press a button to completely discharge it
2. Reinsert the battery – the LED should blink twice
3. Press the digits 2 and 8 simultaneously within 6 seconds – the LED should blink twice
4. Enter the code 9 8 1, the LED will blink 4 times
5. The remote is now reset to its factory defaults
How do I fix my Hisense TV remote?
If your remote stops working, you can perform simply replace batteries and reset it to get it working again.
What do you do when your Hisense remote stops working?
If you have a Hisense remote that has suddenly stopped working, chances are it’s not dead for good. There are a few easy fixes you can try before resorting to replacing the device. If your Hisense remote is no longer responding to commands, check to make sure the batteries haven’t run out of power. If this is not the case, there may be an issue with the signal from the remote to the television, or you may need to reset or sync your remote with your TV by
To Wrap things up!
If the Hisense TV remote still does not work, there may be an issue with the batteries. Try replacing the batteries and see if that fixes the problem. If this fails to resolve the issue, it is possible that you will need to replace your remote completely. This can be done by contacting support for help.