My iPhone’s Safari cannot open the page because the server cannot be found. Is there anything I can do to restore the browser to working order? If so, where can I find a solution?
Most users of Apple devices, like the Mac, iPhone, or iPad, use the Safari browser to browse the internet.
While Safari’s interface is simplified and it’s a breeze to browse with it, you may still experience the Safari can’t connect to server issue.
Most of the time, the issue occurs after you update iOS/macOS or modify your network settings.
It is possible to fix the issue in multiple ways. Our article shows you ten simple solutions that you can follow!
Why Does My Safari Can’t Connect to the Server?
In most cases, when you are unable to use a browser on your devices, like Safari or Chrome, it is because the DNS server is not responding. It is also possible that you are surfing the web using an unreliable DNS server on your Apple device.
Apart from that, most problems are caused on the user’s end. You can, however, resolve the error when Safari cannot open the page because the server cannot be found by resetting the DNS settings, which we will discuss in the next section.
How to Fix Safari Can’t Find Server?
If you are unable to surf the internet on Safari because it cannot find a server, you only have to perform one of the following fixes!
1. Check Your Wi-Fi Connection
Safari may not be able to connect to the server or load a webpage if your connection is slow. It is essential to have a constant connection to run or load a Webpage without any problems. Suppose a temporary Wi-Fi network connection failure occurs suddenly, with Safari showing that the server cannot be found.
It is likely that the problem is with your internet, so you may be able to fix it at home using some troubleshooting methods.
- Disable your device’s Wi-Fi network and then enable it again.
- Disconnect your home router for like 15 seconds then re-plug it in.
- You will need enough Wi-Fi signal to load the Web page.
- Don’t use Airplane mode on your device.
- If your internet is slow, use your mobile data.
2. Enter Correct Webpage URL
Do you enter the correct URL in your Safari browser?
It is common for us to forget or mislead you to provide the correct URL when we are in a hurry to search certain content in the browser. Hence, Safari can’t find the server error messages. Make sure that you do not miss any word in the URL that you are providing.
Whenever you copy a URL from another Website or a social media site, make sure it has a full URL structure like “https://www.xyz.com/ or .edu”. By doing so, you will land in the right location where you want to go.
3. Reload Your Page
The solution to Fix Safari Can’t Find Server is to reload your Web page. It is possible that you will see such connection errors when the receiver did not forward the command to open the webpage to the server. Furthermore, it helps you confirm that the URL you are using is the correct one.
You can use the next method if you’ve tried reloading the page two, three times and it still does not work.
4. Disable Content Blocker
Using Safari’s content blocking extensions, the app will not open unwanted ads or malicious websites. These third-party tools, however, may result in safari being unable to connect to the server. Therefore, try disabling your iPhone’s content blocker and reloading the page that you’re having trouble viewing.
The first step in turning off the content blocker on iPhone is to:
- Go to the Settings on your device.
- Scroll down and choose Safari.
- Then tap on Content Blocker.
- Finally, toggle off all options.
5. Clear Safari Cache and Data
Cleaning the Safari browser’s cache and data will remove all malicious content or glitches. This will also resolve the Safari cannot find server issue.
Follow these steps to clear the Safari cache on your iPhone or iPad.
- Go to Settings on your device.
- Find Safari and choose it.
- From the list, touch Clear History and Website Data.
- You’re done!
Disable Firewall and Antivirus
Safari cannot find a server on Mac? Make sure your firewall and antivirus are turned on. Both of these will protect you from malicious content. The content which you are visiting may be considered a blot by firewalls and antivirus programs. For iPhone or Mac, you must disable the firewall or anti-virus first. Then you can load the content.
If Safari can’t find the server on Mac due to Firewall, first disable the Firewall.
Open your Mac laptop.
Click on the Apple logo from the upper left toolbar.
After that, click on System Preferences.
Click on Security & Privacy.
Next, click on Firewall.
Finally, click on the Firewall: Off option from the right side.
Change the DNS Settings
Domain Name Systems (DNS) let browsers access websites by directing them to the right URL. In addition to bypassing geo-restrictions, you can use an unreliable DNS for various reasons. However, it might affect the ability of Safari to connect to servers. In this case, we suggest you reset the DNS. To do this:
- Go to iPhone Settings.
- Tap on the Wi-Fi option.
- Open your current connected Wi-Fi. For that, you can tap on the small circle “i” icon beside your Wi-Fi name.
- Under the DNA section, tap on Configure DNS.
- If it’s already on Automatic, then change it to Manual.
- After that, tap on Add Server option.
- Type Google DNS server either 188.8.131.52 or 184.108.40.206
- Finally, tap on Save to make changes.
Reset Network Settings
To access the internet on iPhone/Mac/iPad, you can clear all the network settings and start over. Simply follow these steps:
- Open the iPhone Settings.
- Tap on the General option.
- Next, Scroll down and tap on Reset button.
- Finally, again tap on Reset Network Settings to confirm.
Provide Separate SSID Name for 2.4 GHz and 5 GHz
Safari will act abnormally if you use the same SSID/WiFi name on both the 2.4 GHz and 5 GHz networks. Change the SSID for networks that operate on 2.4 GHz and 5 GHz for an easy solution.
Update Your Device
When the Safari browser is updated but the device OS (Operating System) is outdated, you will have difficulties using Safari. Further, Safari can’t find a server problem that might be caused by a bug in the device OS.
The fix for Safari not connecting to your iPhone is to update mobile operating systems.
Firstly, for iPhones and iPads, you’ll need:
- Open iPhone Settings.
- Tap on General.
- Next, tap on Software Update.
- Make sure iOS is updated. You might also want to update your iPhone OS.
Your device will have to be updated and installed several times before a new IOS version can be installed. Therefore, please be patient!
You May Also Like: Safari Won’t Connect To Server on Mac
Safari cannot open the page due to the server not being found error for Mac users in this section. Follow the steps below to connect the Safari browser to the server.
- On the Mac, click the WiFi icon in the top right corner of the screen
- Then, open the Network Preferences option.
- Next, choose the WiFi network and delete it.
- Finally, click the Apply Now button to remove the network.
- Click the Plus/+ tab to add the WiFi network again using the same window.
- Once it has been selected, click Create.
- The last step is to connect to the network by clicking on it and entering the password.
People also ask
Users of the iPhone can rely on Safari to browse the web on a regular basis. Keeping your personal data safe from an outsider is simple, easy, and most importantly, secure. But, if Safari cannot find a server on your iPhone, iPad, or Mac, then use the above-mentioned solutions.
Using the comments section is the best way to ask any questions you may have about the Safari browser.