Check out 5 methods to fix the infamous iPhone 11 Stuck on Black Screen with the Apple logo at startup.
An iPhone 11 caught in the Apple logo is a sign that the phone has software or hardware failures and is unable to start the system. This usually happens due to conflicts with plug-ins or system bugs after a jailbreak (method to unlock the system). From a technical point of view, the Apple logo appears, mainly, when some essential system component does not load in the system initialization process. However, with the iOS system update, many of you may encounter the iPhone problem caught in the Apple logo.
This does not mean that your iPhone is broken, in fact, there are several solutions to fix this error. Read on to fix your iPhone 11 stuck in the Apple logo effectively in 5 different ways.
How to fix iPhone 11 Stuck on Black Screen with Apple Logo
Solution: 1. Charge your iPhone 11 for 30 minutes
Once you have tried to jailbreak your iPhone or update your iPhone to the latest iOS system, the battery will be drained. If the battery capacity is empty, then the problem of the iPhone stuck in the Apple logo can happen frequently. Try to charge your iPhone for at least 30 minutes.
You can first try that. Otherwise, go to the next appropriate solution.
Solution: 2. Force a Restart
Sometimes your iPhone may get stuck during a jailbreak or update, a hard reset is a good way to get your iPhone back to normal. There is no damage to the device and no data loss as well. According to different iPhones, the detailed steps differ for each model.
iPhone 6s and earlier: Press and hold both the power button along with the Home button. And release the buttons when the Apple logo appears
For iPhone 7 and 7 Plus: Press and hold the Volume button down and the Power button until you see the Apple logo, then release the buttons to restart the iPhone as normal.
For iPhone 8, X, 11, 12, and later: Press and release the Volume button upwards. Press and release the Volume button down. Press and hold the side button. Keep holding the Side button until the Apple logo appears, then release your finger to restart the iPhone.
You can first try that. Otherwise, go to the next appropriate solution.
Solution: 3. Use the Recovery mode
If both of the above methods fail, you can try to boot your iPhone into recovery mode and then restore your phone via iTunes, which is useful in many situations. However, it can cause data loss if you don’t regularly back up to iTunes or iCloud. In that case, you can proceed to method 4 for repair without loss of data.
- Connect your iPhone to your computer and start iTunes. Make sure you have the latest version of iTunes.
- Keep your iPhone connected and boot your iPhone into recovery mode:
- For iPhone 6s and earlier: Press and hold the Home and Top (or Side) buttons at the same time. Keep holding them until you see the recovery-mode screen.
- For iPhone 7 and 7 Plus: Press and hold the Side and Volume Down buttons at the same time. Keep holding them until you see the recovery-mode screen.
- For iPhone 8, X, 11, 12, and later: Quickly press and release the Volume Up button. Quickly press and release the Volume Down button. Then press and hold the Side button until you see the recovery-mode screen.
- Restore your iPhone to iTunes. Locate your iPhone on your computer. When you see the option to Restore or Update, choose Restore to fix your iPhone stuck with the Apple logo. Note that it will erase all data on your iPhone. Make sure you have a backup for your iPhone.
Solution: 4. Use iOSFix to fix the iPhone stuck in the Apple logo without losing data (Recommended)
Leawo iOSFix software is one of the best iOS system recovery programs. It can fix more than 50+ iOS / tvOS issues, like the iPhone stuck in the Apple logo, stuck in the black screen of death, stuck in recovery mode, iPhone without service, etc. It can detect almost all iOS devices (iPhone, iPad, and iPod) and Apple TV devices, and helps you to restore your iOS system to the best state before the problem occurs. What you need to do is just a few simple clicks. You can follow the guidance below to fix your iPhone stuck with the Apple logo.
Step 1: Download the Leawo iOSFix on your computer.
Step 2: Connect your iPhone to your computer and start the program. It will automatically detect your iPhone and show it on its main interface.
Step 3: Click “Start”, and you will find two repair modes. Standard Mode can fix your iPhone problems without losing any data, while Advanced Mode is provided to solve more serious problems, but it will erase all data on your iPhone. Make sure you have a backup. For the iPhone stuck in the Apple logo issue, Standard Mode is recommended.
Step 4: After choosing a repair mode, the program will offer 3 ways to download firmware, including intelligent one-click online download, manual browser download, and firmware download from the local drive. If you have not downloaded any firmware on your computer, then choose one-click smart online download.
Step 5: After downloading and checking the firmware. Click “Fix Now” to start repairing your iPhone stuck in the Apple logo. It will usually take 10 minutes for the repair process. Wait patiently and your iPhone will return to normal as usual.
Solution: 5. Contact Apple
If you’ve tried all of the methods above, and your iPhone 11 Stuck on Black Screen with Apple Logo, it could be a hardware problem. In this case, you have to contact Apple and make an appointment, or contact professionals for hardware repair.
